background image

Operating modes

Depending on your transmitter model and configuration, the Micro B collar 
receiver is able to stimulate the dog in different ways and with different 
levels.

For more detailed information, please check the user guide of your 
transmitter.

The Micro B collar receiver is equipped with:

A buzzer.

A vibrator.

A stimulation system.

The Micro B collar receiver operates in 4 different default modes:

Clicker (level 0).

Stimulation (flash / nick, continuous and rising).

Tone with vibration and stimulation (flash / nick, continuous and 
rising).

Warning tone and vibration followed by tone, vibration and 
continuous stimulation.

4   |   Micro B Collar Receiver - User Manual - EN - 1.0

Main benefits

Your Micro B collar receiver uses the best technologies in the electronic 
collar industry and most of them are patented by Martin System®:

The New High Tension Transformer - NHT 

(patented).

The consistent reliable stimulation - S.S.C. ("Stimulation à Sensation 
Constante") 

(patented).

The Contact Measurement System - CMS 

(patented).

The best quality contact points (made of marine grade stainless steel) 
that greatly reduces the risk of chemical necrosis .

 

The smallest receiver with the longest battery life

The Martin System® patented NHT Transformer is about 1/8th the size 
of a standard transformer, with the same capacity of stimulation and 
consistent reliable stimulation.

The main benefits of using a NHT Transformer are:

The smallest receiver with the longest battery life in standby.

A stable stimulation even at high level when the battery is low.

Micro B Collar Receiver - User Manual - EN - 1.0   |   5

Summary of Contents for Micro B

























Reviews: