Error Reference 15 -
No encoder pulses detected while the tractor motor runs. See Error
Reference 19.
Error Reference 16 -
Synchronization error during pause. See Error Reference 04.
Error Reference 17 -
Missed signature cycle interrupt signal. See Error Reference 11.
Error Reference 19 -
No encoder pulses detected. Check continuity of the encoder cable.
Error Reference 20 -
Incorrect ratio of encoder pulses to signature flag pulses. Carefully remove any
contamination from the encoder disk and the home flags. See Error
Reference 11.
Error Reference 30/31 -
EPROM error. Try setup again.
13
If after carefully reading this manual you still need further assistance, here are several easy ways to
contact someone who can help.
1.
Call your dealer, the person who sold you the machine. All of Martin Yale’s dealers are
provided with instructions on how to operate and maintain Martin Yale machines.
2.
Call Martin Yale’s Technical Assistance line at
260-563-0641
.
3.
Email Martin Yale at
info@martinyale.com
4.
Contact Martin Yale’s website, located at
www.martinyale.com
5.
Mail us at
251 Wedcor Avenue
Wabash, IN 46992
