12
Martin DMX 5.3 and RDM 5.5 Splitters user manual
Warning! Do not fasten screws with a thread length of more than 4
mm (0.15 in.) into the ends of either Splitter.
19-inch rack mounting
Both the DMX 5.3 Splitter and the RDM 5.5 Splitter can be mounted in
pairs side-by-side in standard 19-inch racks. Both models have the same
dimensions and mounting system. To mount in a rack:
1. Fasten two Splitters together side-by-side using the four Torx 10
M3 x 6 thread-forming attachment screws supplied with one of the
Splitters as shown at
B
in Figure 7.
2. Fasten the L-brackets supplied with one of the Splitters to the outer
ends of the pair of Splitters using the eight supplied thread-forming
Torx 10 M3 x 4 screws as shown at
C
in Figure 7.
Warning! Do not fasten screws with a thread length of more than
4 mm (0.15 in.) into the ends of either Splitter.
3. Use the L-brackets and suitable screws to fasten the Splitters into the
rack.
Figure 7: Mounting options
B
B
C
C
A
A
Summary of Contents for DMX 5.3 Splitter
Page 1: ...Martin DMX 5 3 Splitter Martin RDM 5 5 Splitter user manual TM TM ...
Page 23: ...Block diagrams 23 Block diagrams Martin DMX 5 3 Splitter Martin RDM 5 5 Splitter ...
Page 27: ......
Page 28: ...www martin com Olof Palmes Allé 18 8200 Aarhus N Denmark Tel 45 8740 0000 Fax 45 8740 0010 ...
