Martin Engineering M4101-01/19
8
Martin
®
HD QB1™ Cleaner
Figure 4. Removing and Installing Blade
Removing blade
NOTE
Blade clamps should remain captive to mainframe assembly
during blade removal and installation.
1. Loosen set screws (A) from operator side of mainframe (E).
2. Disengage blade clamp (B) from blade cartridge (D).
3. Pull blade cartridge away from blade clamp (C) and remove from
mainframe.
Figure 5. Torque Tube Installation
Installing torque
tubes
1. Insert torque tube (F) into mainframe (E).
2. Slide torque tube collar (G) onto torque tube.
3. Align collar (G) with mainframe. Tap collar into mainframe with hammer
until collar is fully engaged in mainframe.
A. Set Screw
B. Blade Clamp
C. Blade Clamp
D. Blade Cartridge
E. Mainframe
B
A
D
C
E
Blade stop removed for clarity.
E
F
G
Installation