© Martin Engineering GmbH
9
M3814UK-03/16
Product Description
3
Product Description
3.1
Design and Function
The MARTIN
®
QC
™
#1 HD MT primary cleaner or MARTIN
®
PD
QC
™
#1 HD MT primary cleaner with tungsten carbide (TC) inserts
enables effective elimination of return material and quick replace-
ment by loosening only one bolt holding the durable primary cleaner
cartridge. By choosing the installation position of the primary cleaner
at the head pulley and the secondary cleaner just after the head pul-
ley it is ensured that the cleaned off is again fed to the material flow.
The primary and the secondary cleaners can be used individually,
but for optimum cleaning results it is recommended to install a com-
bined system of pre- and primary cleaners.
3.2
Tensioners
The MARTIN
®
(PD) QC
™
#1 HD MT primary cleaner and the Martin
Engineering tensioners specifically developed for it give the best re-
sults and conform to the general state-of-the-art technology.
Martin Engineering recommends the following tensioners for the dif-
ferent versions:
MARTIN
®
QC
™
#1H primary cleaner with tungsten carbide (TC)
insert
Part no. QC1H-XXME.
•
MARTIN
®
Twist spring tensioner:
Part no. 31443-I+E.
•
MARTIN
®
spring tensioning device:
Part no. 38180.
NOTE
A product that has not been installed properly or correctly may dis-
rupt the conveyance process and contaminate the bulk material to
be transported.
The operator is therefore responsible for implementing the neces-
sary counter measures.
When using with contaminants Martin Engineering or a represent-
ative can help with the positioning or customized solutions.