© Martin Engineering GmbH
3
M3682UK-09/17
Introduction
2
Introduction
2.1
About these installation instructions
Non-compliance with these installation instructions can result in loss
of compensation for damage and/or warranty claims.
2.1.1
Scope
These installation instructions apply solely for the product described
herein and are intended for those persons who install this product,
commission it, and monitor its usage.
2.1.2
Copyright
The products described and these installation instructions are
protected by copyright. Any reproduction without a licence will be
prosecuted. All rights to the present document are reserved,
including its reproduction and/or copying in any conceivable
manner. Reprints of this document require the written consent of
Martin Engineering.
The technical standard at the time of delivery of the product and its
technical documentation are decisive as long as no other
information is provided. The product and documentation may be
subject to technical changes without prior notification.
Earlier documents then lose their validity. Martin Engineering's
General Terms of Sales and Delivery shall apply.
2.1.3
Exclusion of liability
Martin Engineering guarantees the flawless function of its product in
accordance with its advertising, the published product information
and its technical documentation. Martin Engineering shall assume
no liability for efficiency and flawless function if the product is used
for a purpose other than that described in the “Intended Use” section
or for damage resulting from the use of accessories and/or spare
parts which were not supplied and/or certified by Martin
Engineering.
Martin Engineering products are designed for a long service life.
They conform to the state of the art in science and technology and
were thoroughly inspected before shipment. In addition to this
Martin Engineering constantly performs product and market
research for continuous product development.
Martin Engineering offers competent support whenever
malfunctions and/or technical problems occur. Suitable measures
are taken immediately. The warranty provisions of Martin
Engineering apply and can be sent to you as needed.
Summary of Contents for SQC2
