© Martin Engineering GmbH
8
M3504UK-10/15
Product Description
3
Product Description
3.1
Design and Function
The XHD QC
™
#1 belt cleaner (VHD = eXtra Heavy Duty) is de-
signed for extremely heavy-duty applications; it can be used on con-
veyor belts with a width of up to 3000 mm and a belt speed of up to
6 m/sec. Placing the installation position of the primary cleaner at
the head drum and the primary cleaner (e.g. QC
™
#2) just after the
head drum ensures that scraped-off material is again added to the
material flow.
The pre-cleaner and the primary cleaner can be used individually,
but for optimum cleaning results it is recommended to install a com-
bined system of pre- and primary cleaners.XXX
3.2
Tensioners
The MARTIN
®
XHD QC
™
#1 belt cleaner and the Martin Engineering
tensioners, specifically developed for it, provide the best results and
conform to the general state-of-the-art technology.
Martin Engineering recommends the following tensioners for the
MARTIN
®
XHD QC
™
#1 belt cleaner:
• MARTIN
®
XHD Spring Tensioner (with rubber dampers),
part no. 38003+E
• MARTIN
®
XHD Turnbuckle Spring Tensioner, part no.
35978+E
• MARTIN
®
XHD Air Tensioner, Part no. 32135+E
NOTE
A product that has not been installed properly or correctly may dis-
rupt the conveyance process and contaminate the bulk material to
be transported.
The operator is therefore responsible for implementing the neces-
sary counter measures.
When using with contaminants Martin Engineering or a represent-
ative can help with the positioning or customized solutions.
