© Martin Engineering GmbH
3
M3504UK-10/15
Introduction
2
Introduction
2.1
About this Installation sManual
Non-compliance with this installation manual may lead to compen-
sation claims for loss or damage and/or warranty claims becoming
null and void.
2.1.1
Scope
This installation manual applies exclusively to the product described
herein and is aimed at those individuals who install dasthis product,
put it into operation and monitor its use.
2.1.2
Copyright
The product described and this installation manual are protected by
copyright. Copying without a license will be legally prosecuted. All
rights to this document are reserved, including the reproduction and/
or distribution in any thinkable way or form. The reprinting of this
document is only allowed with written permission from Martin Engi-
neering.
The technical standard at the time of delivery of the product and
technical documentation is decisive, as long as no other information
is given. We reserve the right to make technical changes without any
announcement. Earlier documents will no longer be valid. Martin En-
gineering General Conditions of Sale and Delivery apply.
2.1.3
Disclaimer
Martin Engineering guarantees the faultless operation of the product
according to the advertising, edited product information, and techni-
cal documentation. Martin Engineering does not accept any liability
for the efficiency and proper operation, if this product is used for any
other purpose, other than as described in the section "Appropriate
Use"; or for any damage caused by the use of accessories and/or
spare parts, that were not delivered and/or certified by Martin Engi-
neering.
The products from Martin Engineering are designed for a long ser-
vice life. They conform to the respective current state-of-the-art sci-
ence and technology and they have been thoroughly tested prior to
delivery. In addition to continuous advanced development of prod-
ucts, Martin Engineering also conducts constant product and market
analyses.
