1. V
Ω
- Input Terminal
This is the positive terminal for voltage and resistance
measurements. Connection is made to it using the red test lead.
2. COM - Common Terminal
This is the negative (Ground) terminal. Connection is made to it
using the black test lead.
3. Shift
Selects the second function of other soft keys.
4. Display
5. Rotary switch
Selects the desired range.
6. Soft keys
Allow access to advanced functions.
7. TEST button
Used to perform all tests apart from voltage measurement.
3
2
3
6
4
7
5
1
K
Ω
APO
DAR
PI
LIMITS
ZERO
A - H
SHIFT
8.8.8.8
-8.8.8.8
PI DAR AUTO HOLD SHIFT LIMIT
88
READ
MEM
0
100
200
300
400
500
600
700
800
900
x100
0
0
0.5
1
2
3
4
5
6
7
10
15 20
30 50
100
APO
mG
Ω
KM
Ω
V
V
z
PI (Polarization Index)
DAR (Dielectric Absorption Ratio)
Auto Power Off: user selectable (default 5 mins)
APO (Auto Power Off) disable option
99-result Memory
Safety: Complies with BS EN 61010 and BS EN 61557
Overvoltage Category: CAT III 600V, Pollution Degree 2.
Altitude: Up to 2000M
Protection: IP44
Not for use in wet conditions.
Operating Environment: 0°C to 40°C at < 70% relative humidity
Storage Temperature: -20°C to 60°C, 0 to 80% R.H. with batteries
removed from tester.
Dimensions: 90 x 210 x 54mm
Voltage test
Voltage warning: >30V
Continuity test
Short circuit current:>200mA
Auto-Discharge: when TEST button released
Range
Resolution
Accuracy
600V AC/DC
1V
±(3%
rdgs
+5d)
Range
Resolution
Accuracy
40
Ω
0.01
Ω
±(3%
rdgs
+5d)
