Martinelli PRIMO VIAGGIO SL, Instructions For Use Manual

16

   Thank you for choosing a Martinelli 

product.

  Product characteristics

  •  The "Primo Viaggio SL" group 0+ car seat has been 

subjected to all safety tests and is type approved under 

European standard ECE R44/04, for children weighting 

from 0 to 13 kg (0 to 12-14 months).

  • 

IMPORTANT: Primo Viaggio SL must be installed 

in a rearward-facing position on seats without 

airbags. Do not install it on rearward- or sideways-

facing vehicle seats.

  •  It comes with an "Adjustable Side Impact Protection 

System". This offers improved protection against side 

impacts with the “simultaneous system” for headrest-

harness adjustment.

  •  It is type approved for installation in vehicles without a 

base support or with two types of base, as required (the 

use of a seat base offers improved safety): "Belted Base" 

or "Isofix Base" (check that the vehicle is fitted with the 

Isofix system - a list of vehicle models fitted with the 

system is provided with the product).

WARNING

  • 

Read the instructions carefully before use and keep 

them in the holder provided for future reference. 

Failure to closely follow the car seat installation 

instructions will put your child at risk.

  • 

Never leave the child unattended.

  • 

Always use the restraint system.

 • The assembly and installation operations must be 

conducted by adults.

 • Avoid inserting fingers into the mechanisms.

 • Install this group 0+ car seat in a rearward-facing 

position.

 • Death or serious injury can result if this car seat is 

installed on seats with airbags.

 • In the case of swivel or repositionable vehicle seats, 

only install this car seat in a rearward-facing position.

 • When travelling take special care to make sure that 

luggage or other objects do not injure the child in the 

car seat in the case of accidents.

 • Do not use installation methods different from those 

indicated. This would result in the risk of detachment 

from the seat.

 • Car seat, group 0+, “Universal” category, type approved 

under European standard ECE R44/04 for children of 

weight from 0 to 13 kg (0 to 12/14 months). Suitable for 

installation on the majority of vehicle seats, but not all.

 • Group 0+ car seat with class E Semi-Universal Isofix base 

(accessory).

 • The car seat can be correctly installed if the vehicle’s 

use and maintenance manual indicates compatibility 

with “Universal” group 0+ restraint systems.

 • This car seat is classed as “Universal” in compliance with 

stricter type approval criteria than previous models that 

do not have type approval labels.

 • The car seat can only be used in type approved 

vehicles, fitted with static or inertia-reel three-point 

seatbelts, approved under regulation UN/ECE no. 16