8
on the rear electronics panel of the speaker. Your
speaker features the following audio inputs:
•
Ethernet:
used for streaming audio from Apple
AirPlay or DTS Play-Fi
®
.
•
Aux [Auxiliary]:
used for either digital optical
(Toslink) or analog input. This input will accept
either a standard 3.5mm stereo headphone
style or mini-Toslink plug. A special mini-Tos-
link to Toslink cable or mini-Toslink adaptor is
required for digital optical connection.
In addition, the speaker features two inputs that do
not require a physical connection:
•
Wireless:
used for streaming audio from Apple
AirPlay or Play-Fi
®
.
•
Bluetooth:
used for streaming from compatible
Bluetooth equipped devices, including aptX
®
Bluetooth devices.
Please note, when utilizing this speaker to reproduce
audio from a television via the speaker’s Auxiliary
(digital or analog) connection, the television’s audio
output should be defeated. Some televisions will
allow you to turn off the internal speaker via the
television’s menu system. Other televisions may
require you to turn the television’s volume to “zero”
or “mute.” Additionally, your television may require
you to turn on the digital optical output or and/or
configure the output for 2-channel (stereo) sound.
Please refer to your television’s manual.
NETWORK CONNECTION
To stream audio to your speaker, a LAN (local
area network) connection is required. This connec-
tion can be established using Wi-Fi or Ethernet.
Refer to the wireless setup section of this manual for
setup and usage details.
SUBWOOFER CONNECTION
You may choose to employ a separate subwoofer
to enhance bass performance. Subwoofers can
be connected via the speaker’s “Sub Out” RCA
connection. We recommend using a superb
MartinLogan subwoofer.
Using a high-quality RCA style cable designed for
subwoofer connection, connect “Sub Out” from the
speaker to the “LFE In/Sub In” on the subwoofer.
On the back panel of the speaker, set the Sub
Out button to “On” (in its “on” state the button will
be depressed—in its “off” state the button will be
extended). When the Sub Out is turned on, the
deep bass output of the speaker will be reduced
(to optimize performance) and bass information will
be sent directly to your external subwoofer for a
deeper, extended, overall bass response.
Reference your subwoofer’s manual to learn how
to properly adjust the sub’s level and phase con-
trols to achieve proper blending with the speaker.
When Sub Out is set to “On,” the speaker will
handle the crossover setting to the subwoofer,
Fig. 1
Connection Panel
Summary of Contents for Crescendo X
Page 1: ...u s e r s m a n u a l...
Page 6: ...6...
Page 27: ...m a n u e l d e l u t i l i s a t e u r...
Page 32: ...32...
