77
9.2Parallel Board Setting and Power Module
9.2.1 Install Power Module of Rack1
1.
The parallel board(s) of the Rack 1, the SW2 must be set to the right side, please refer to the
figure 9-2 as below.
Warning:
For the cabinets which can insert more than 5 power modules, there are two parallel boards
inside the cabinet. Both of these two SW2 have to be adjusted simultaneously.
2.
Refer to Table 2-1 to set the module address.
Figure 9-2 Rack 1 SW2 set to the right side
9.2.2 Install Power Module of Rack2
1.
The parallel board(s) of the Rack 2, the SW2 must be to set the left side, please refer to the
figure 9-3 below.
Warning:
For the cabinets which can insert more than 5 power modules, there are two parallel boards
inside the cabinet. Both of these two SW2 have to be adjusted simultaneously.
2.
Refer to Table 2-1 to set the module address.
Figure 9-3 Rack 2 SW2 set to the left side
