39
6 Communication
6.1 Communication ports
RS232 or USB communication ports
The RS232 and USB communication ports cannot operate simultaneously.
1. Communication cable to the serial or USB port on the computer.
2. Connect the other end of the communication cable to the RS232 or USB
communication port on the UPS.
Emergence Power Off
The Emergence Power Off interface provides an emergence power off function. When
the EPO function is enabled (default setting), once the EPO port is pulled out, the UPS
would shut off the output and enter into EPO mode, and the UPS would not respond
anything ON/OFF request unless the port is plugged back.
Dry in & Dry out
Dry in allows remote action to switch On/ switch Off/ maintain bypass the UPS.
When contact changes from closed to open, the UPS is switch On/ switch Off/ maintain
bypass the UPS.
The Dry out port is normally closed, if the Dry out port is open, it indicate that the UPS
is Loaded power/ On battery mode /Battery low /Battery disconnected /Bypass
output/ups normal.
Summary of Contents for Tacoma II Series
Page 21: ...21 LV mode 2 HV mode When 3 UPSs in parallel JP1 JP2 wiring as below ...
Page 35: ...35 ...
Page 37: ...37 ...
Page 52: ...52 614 40089 00 ...