20
3-7-1. Main interface (home page)
.
1)
In the first line, it will display the mode name in different running mode;
2)
When the alarms happen, the warning or fault information will display below the “load” line;
3)
When the front panel is not operated for quite a long time, the page will recovery to this home page;
4)
Press the “UP” or “DOWN” button to enter the main operation menu (see 3-7-2-1);
5)
When LCD is on this home page, if UPS is in bypass, you could press the “ON/ENTER” button to turn on
the UPS to line / converter / ECO / battery mode according to the setting and input status; in reverse,
you could press the “OFF/ESC” button to turn off the UPS to bypass mode or shutdown. This has been
mentioned on above section of “Single UPS Operation”.
3-7-2. Operation menu
3-7-2-1. Main menu
1)
After pressing the “UP” or “DOWN” button at the home page, the screen will display the main menu of
the operation menu. In the main menu, there are 5 items (Control / Measurement / Information / Setting
/ Alarm) for select.
2)
Press “UP” or “DOWN” button to select item;
3)
Press “ON/ENTER” button to confirm the selection;
4)
Press “OFF/ESC” button to leave this menu to home page;
5)
The operation is same or similar in other menu or page, please refer to the section of “Button Operation”.