2
Table 1:
Module type Manufacturer
Type
Rating
6K
Tianshui 213 Electrical
Apparatus Co.,Ltd
GSC1(CJX4-d)-4011
220Vac,40A
LS Industrial systems Co.,Ltd.
GMC(D)-32
600Vac,45A
10K
Tianshui 213 Electrical
Apparatus Co.,Ltd
GSC1(CJX4-d)-6511
220Vac,65A
• This UPS should be connected with TN earthing system.
• The power supply for this unit must be single-phase rated in accordance with the equipment nameplate. It
also must be suitably grounded.
• Use of this equipment in life support applications where failure of this equipment can reasonably be
expected to cause the failure of the life support equipment or to significantly affect its safety or
effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic
mixture with air, oxygen or nitrous oxide.
• Connect your UPS power module’s grounding terminal to a grounding electrode conductor.
• The UPS is connected to a DC energy source (battery). The output terminals may be live when the UPS is
not connected to an AC supply.
1-3. Maintenance Warnings
• Service and repair should be done only by trained personnel. During any service work to the UPS, it should
be turned off or manually bypassed. Note that potentially lethal voltages exist within this unit as long as
the battery supply is connected.
• Your UPS power module and battery module(s) do not require routine maintenance. Do not open them for
any reason. There are no user-serviceable parts inside.
• Even after the unit is disconnected from the mains, components inside the UPS system are still connected
to the battery packs which are potentially dangerous.
• Before carrying out any kind of service and/or maintenance, disconnect the batteries and verify that no
current is present and no hazardous voltage exists in the terminals of high capacity capacitor such as
BUS-capacitors.
• Fuses should be replaced only by factory authorized personnel. Blown fuses should be replaced only with
fuses of the same number and type.
• Verify that no voltage between the battery terminals and the ground is present before maintenance or
repair. In this product, the battery circuit is not isolated from the input voltage. Hazardous voltages may
occur between the battery terminals and the ground.
1-4. Battery Warnings
• Do not operate your UPS without connecting it to an external battery module.
