![background image](http://html.mh-extra.com/html/marvelmind/indoor-navigation-system/indoor-navigation-system_operating-manual_1734618014.webp)
14
4.2
Setup software (Dashboard)
4.2.1
After charging boards download the
latest stable software package
from
http://www.marvelmind.com/#Download
4.2.2
Select the SW version of the portable or distribution and unzip
4.2.3
Run the
Dashboard
and update the SW for all beacons and modem using
Dashboard
=>
Firmware
=>
Choose the file
=>
Program
4.2.4
If you see message in the Dashboard
“Not found modem connection to computer through
USB”,
usually, it means that the driver is not installed. To install the driver, download it with link
at top and run installation file”
click on the link under, install the driver
4.2.5
Ensure that
(a) You are programming modem’s SW to modem and beacon’s SW to beacon
(b) You are using SW for 4.9, if you have HW v4.9
(c) You have the SW from the same SW pack, i.e. the Dashboard SW and modem SW
and beacon SW must be from the same SW pack. Don’t mix SW releases
4.2.6
While beacon/modem is connected to the Dashboard, press Default button in the Dashboard to
upload the default settings. See the print screen below:
Summary of Contents for Indoor Navigation System
Page 1: ...1 Marvelmind Indoor Navigation System Operating Manual V2017_05_20 www marvelmind com ...
Page 8: ...8 3 3 Indoor GPS system close up and internal view LiPol 3 7V 1000mAh ...
Page 24: ...24 5 1 Beacon HW v4 9 external interface 4x4 pinout ...
Page 25: ...25 5 2 Modem HW v4 9 external interface pinout ...