42
Industrial Super-Beacon Metal-25kHz
Do not disassemble the Industrial beacons. Otherwise, warranty will be lost
-
Supports dual-use
– RX and TX beacon. It can transmit
on its native ultrasonic frequency (25kHz) and it can
receive on any ultrasonic frequency via an embedded RX
sensor
– like Industrial-RX or Mini-RX does. Effectively,
the Industrial Super-Beacons beacons combines inside an
Industrial-TX and Industrial-RX. Additionally, the beacon
supports both AI and NIA architectures. Thus, it is called
Industrial Super-Beacon
-
Electronics is IP67 protected
-
Special IP67-protected 25-kHz transducers
-
External antenna with SMA connector for extended radio
range
-
Corresponding IP67 connectors (male part) included
-
No battery inside
-
Extended working temperature range from -40°C to +50°C (not tested, provided by design)
-
Embedded reset switch and DFU switch
– magnetic control
-
Two IP67 external connectors:
-
RS485 modification pinouts
-
Can work together with modems with corresponding radio (radio bands must match)
-
Can work with any Mini-RX beacon or Beacon HW v4.9 with 25kHz ultrasonic sensors (radio bands
must match)
-
Most of all designed to work together with
Industrial-TX and Industrial-RX beacons (radio bands must match)
-
Up to 30m with Beacon Mini-RX
-
Optional external
Uploading Beacon Industrial’s (Not super) DFU software to Industrial Super-
Beacon hardware make permanently damage for Industrial Super-Beacon board.
Be double attentive with update
Summary of Contents for Mini-RX
