21
5.3 Launching robots in the custom map
When you made a test launch of the robot and succeed, you can build more complex
maps and launch the robot in it.
How to:
1)
Set up the
Marvelmind Indoor “GPS” system. It’s detailed described in the
2)
Configurate paths and start/end points.
3)
Reset the modem and connect it to the network.
4)
Wait for 30 seconds after connecting (keep the modem and antenna vertically).
5)
Position the robot on the driving zone/path.
6)
Press the blue button (go to point 2 - end point).
7)
After arrival at end point press the black button (go to point 1 - start point)
