2019-07-29
19915821
Inswing and Outswing Locking Handle
Service Instructions-Retrofit
ABSTRACT:
This instruction is intended to show qualified service personnel how to install a new locking handle
(with thumb turn) on an existing secondary panel on an Infinity or Elevate Inswing or Outswing Door.
W A R N I N G !
Drilling, sawing, sanding or machining wood products generates wood dust, a substance known to the State of Cal-
ifornia to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.
W A R N I N G !
Always practice safety! Wear the appropriate eye, ear and hand protection, especially when working with power
tools.
NOTE: Numbers listed in parentheses () are metric equivalents in millimeters rounded to the nearest whole number.
Parts Needed
You Will Need to Supply
• Drill
• 1/8" drill bit
• 7/8" drill bit
• Drill bit stop collar
• Tape
• Hacksaw or rotary tool with cutting head
• Safety glasses
• Pencil
I M P O R T A N T
The template in the back of this instruction must be printed at a 1:1 scale (no scaling).
1
Interior locking handle with thumb turn
2
Keyed cylinder
