2019-07-29
4
Inswing and Outswing Locking Handle
19915821
Service Instructions-Retrofit
8.
Insert the trimmed tail-piece into the turn lock on the
interior handle. Apply a small amount of silicone to hold
the tail-piece in place. See Figure 7 and Figure 8.
Figure 7
Figure 8
9.
Reinstall the multi-point lock on the panel. See
Figure 9
10.
Install the exterior handle. Then install the interior
handle, aligning the tail-piece with the slot in the multi-
point lock and assemble with screws removed
earlier.See Figure 10.
Figure 10
11.
Test the thumb turn to ensure proper function.
1
modified tail piece
1
Silicone
1
Multipoint lock
1
Exterior handle assembly
2
Interior handle assembly
3
Tailpiece
