EXR
Coil
FIG. 7
Fit the slider protector
(A)
onto the slider
and remove the oil seal
(17)
with the help
of a large screwdriver.
IMPORTANT:
when removing the oil seal,
make sure not to damage its seat. Once
removed the oil seals should not be used
again.
FIG. 8
Withdraw the pumping elements
(10)
and
the rebound spring
(11)
from the stanchion
tube top. Replace the seal ring
(9)
if dam-
aged or worn out.
VALVE ASSEMBLY CHANGE
FIG. 9
To check that the valve assembly is operat-
ing correctly, it is necessary to work on the
inside of the stanchion tube.
Slip off the stop ring
(22)
using pointed
pliers.
Pull the valve assembly out of the tube with
one finger in the same sequence as in the
figure: covering
(14)
, valve
(13)
and
washer
(12)
.
17
A
9
11
10
22
14
13
12
