Assembling:
During the assembly of the pumping unit, strictly obey the instructions below.
Do not, at any times, reverse the position of the pumping elements in the fork legs (if you are unsure about anything, please refer
to the relevant exploded view).
Assembling: Assembling the TST cartridge
Click here to view the video instructions.
Assembling: Assembling the DOPPIO-AIR cartridge
Click here to view the video instructions.
Assembling: Reassembling the steering crown unit / arch-slider assembly
A special spanner shall be used to assemble the bottom nuts. Do not, at any times, use other
tools.
Fit both dust seals (
11
) to the stanchions.
Insert the crown-stanchion unit (
3
) in the arch-slider assembly (
4
).
Insert the complete TST cartridge (
10
) in the right leg.
With the special 12mm spanner (
A
), tighten the right bottom nut (
7
) complete with O-ring (
8
) to the
recommended tightening torque (
10 Nm ± 1
).
© Marzocchi Suspension
2005
-
Marathon XC
