MXC
+
ECC
Air
16
15
B
17
FIG. 17
Fit the upper washer
(16)
into the slider so
that it touches the pilot bushing.
FIG. 18
Lubricate the oil seal
(15)
and place it onto
the seal press
(B)
with the hollow side
toward the slider.
Press the oil seal until it touches the lower
washer by using the above seal press.
REASSEMBLY
CAUTION:
before reassembling, all metal
components should be washed carefully
with inflammable, preferably biodegrad-
able, solvent and dried with compressed
air.
PILOT BUSHING AND SEAL
ASSEMBLY
FIG. 16
Check that no dirt or debris is between
slider and bushing. Insert the pilot bushing
(17)
into place so that it adheres to the
slider.
