MXC
+
ECC
Air
D
D
D1
2
C
C
4
LOCK
ADJUSTMENTS
FORK LEG PRESSURIZATION
Blow pressurized air through the valves to set
COMPRESSION damping. To change the
pressure inside the fork legs, remove the
protection cap
(2)
and depressurize each
leg by pushing lightly on valve pin with a bit.
Fully tighten adapter fitting
(D)
, supplied
with the fork, on
M
ARZOCCHI
pump
(C)
.
Screw fitting end –with O-ring
(D1)
on
valve, and pressurize until the required value
is reached. Unscrew the fitting/pump as-
sembly and refit the cap
(2)
.
IMPORTANT:
inflate using special
M
ARZOCCHI
pump with pressure gauge.
Use of improper tools or other procedures
than specified ones might lead to improper
inflating.
NOTE:
in case of air leakages when adapter
fitting
(D)
is fitted, ensure that the O-ring
(D1)
is not damaged.
REBOUND LIMITER
(only left leg)
In case of hard uphill path, fork leg rebound
can be locked for improved behavior.
Position the knob
(4)
on l.h. fork leg top to
“LOCK” to lock rebound limit in this posi-
tion; this also allows to decrease fork leg
height for optimal attitude uphill, thus sup-
porting suspension compression operation.
Reposition the knob to its original position
so that the fork will rebound and restart to
work as before.
WARNING:
do not position to
“LOCK” when riding downhill as
available travel might not be enough, thus
jeopardizing rider’s safety