MXC
+
ECC
Air
1 18
20
19
11
9
FIG. 4
Push the stanchions
(1)
into the sliders
(18)
and let all the oil drain out from the fork legs.
Pump the stanchions several times to help
oil drain off.
WARNING:
Remember to always
recycle any used oil.
To change the fork leg oil follow the proce-
dure as described in section “REASSEMBLY”
from Fig. 27 to Fig. 30.
HYDRAULIC CARTRIDGE CHANGE
AND PUMPING ROD CHANGE
FIG. 5
Turn the fork leg upside-down and unscrew
the foot nuts
(20)
by the use of a 15 mm
socket wrench complete with O-Rings
(19)
.
FIG. 6 (only left leg)
Remove the hydraulic cartridge
(11)
com-
plete with rebound spring
(9)
and foot
washer (
23
, see exploded view) from the
l.h. stanchion.
Replace the whole hydraulic cartridge.