background image

Warranty

M

Z

010

English

7

100

7

WARRANTY

If any component of the Marzocchi Suspension
System is found to be defective in materials or
workmanship within the term of this Limited Two
Years Warranty (the “Agreement”), the defective
component will be repaired or replaced, at the
option of Marzocchi S.p.A., free of charge,
within thirty (30) days after receipt of the
Suspension System by an authorized Marzocchi
dealer, freight prepaid, together with the original
retail invoice or other evidence of the date of
purchase.

1. NOT COVERED:

 This warranty does not

cover damage resulting from accidents,
alteration, neglect, misuse or abuse, lack of
reasonable and proper maintenance,
improper assembly, repairs improperly
performed or replacement parts or
accessories not conforming to Marzocchi
S.p.A.’s specifications , modifications not
recommended or approved in writing by
Marzocchi S.p.A., activities such as
acrobatics , stunt jumping, ramp riding and /
or normal wear and deterioration
occasioned by the use of the vehicle. This
warranty also does not include any
expenses related to the transportation of the
Marzocchi Suspension System to or from an
authorized Marzocchi dealer, labor costs to
remove the Marzocchi Suspension System
from the vehicle, or compensation for
inconvenience or loss of use while the
Marzocchi Suspension System is being
repaired. 

This warranty will be

authomatically void if serial number of
the Marzocchi Suspension System is
altered, erased defaced or otherwise
subject to any tempering.

2. PURCHASER. 

This warranty is made only

with the original purchaser of the Marzocchi
Suspension System and does not extend to
any third parties. The rights of the purchaser
under this warranty may not be assigned.

3. TERM.

 The term of this warranty shall

commence on the date of purchase and
shall continue for a period of  two (2) years
from the date of the original purchase; is
worth the invoice date or the ticket, that
must be kept. 

4. PROCEDURE.

 In event of a defect covered

by this warranty, the purchaser should
contact an authorized dealer or a Marzocchi
Service Centre.

5. ENTIRE AGREEMENT.

 This warranty

supersedes any and all oral or express
warranties , statements or undertakings that
may previously have been made, and
contains the entire agreement of the parties
with respect to the warranty of this
Marzocchi Suspension System. Any and all
warranties not contained in this warranty are
specifically excluded.

6. DAMAGES.

 Except as expressly provided

by this warranty , Marzocchi S.p.A. SHALL
NOT BE RESPONSIBLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL
DAMAGES ASSOCIATED WITH THE USE
OF THE MARZOCCHI SUSPENSION
SYSTEM OR A CLAIM UNDER THIS
AGREEMENT, WHETHER THE CLAIM IS
BASED ON CONTRACT, TORT OR
OTHERWISE. The foregoing statements of
warranty are exclusive and lieu of all other
remedies. Some states do not allow the
exclusion or limitation of incidental or
consequential damages, so thus limitation
or exclusion may not apply to you.

7. DISCLAIMER.

 ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE AND ALL
IMPLIED WARRANTIES ARISING FROM A
COURSE OF DEALING, USAGE OF
TRADE, BY STATUTE OR OTHERWISE, IS
HEREBY STRICTLY LIMITED TO THE
TERM OF THIS WRITTEN WARRANTY .
This Agreement shall be the sole and
exclusive remedy available to the Purchaser
with respect to this purchase. In the event of
any alleged breach of any warranty or any
legal action brought by the purchaser based
on alleged negligence or other tortious
conduct by Marzocchi S.p.A. the
Purchaser’s sole and exclusive remedy will
be repair or replacement of  defective
materials as stated above. No dealer and no
other agent or employee of Marzocchi
S.p.A. is authorized to modify, extend or
enlarge this warranty.

7

Summary of Contents for QR20 Plus








































Reviews: