9
Storage
Rammer should be stored in such position as it is placed on level, after engine and machine have
been cooled down. Be sure to secure the rammer as necessary to avoid falling down. If the rammer
has to be laid down inevitably, tighten fuel tank cap and engine oil plug securely and wait until engine
and machine are cooled down. After laying it down, make sure that there is no leak of fuel or oil. (If
fuel leaks, drain the tank)
Long-Term Storage
l
Drain fuel from fuel tank, fuel line and carburetor.
l
Remove spark plug and pour a few drops of motor oil into cylinder. Crank engine 3 to 4 times so
that oil reaches all internal parts.
l
Clean exterior with a cloth soaked in clean oil.
l
Store unit covered with plastic sheet in moisture free and dust free location out of direct sunlight.
Specification
Model
EMR70H
Motor
Honda GX160
Power kW (hp)
4.0 (5.5)
Operation Mass kg (lb)
70 (154)
Impact Force kN
14
Jumping Stroke mm
50-80
Fuel Tank Capacity L
2.8
Shoe Size mm
350X285
Acoustic Noise
(According to 2000/14/EC)
EMR70H
Measured sound power level
105dB
Guaranteed sound power level
107dB
Working Size
(L x W x H): 689X440X1080 mm
Hand-Arm vibration
Specification (According to ISO 5394, EN 1033 and EN500-4): 7.2m/s
2
