12
OPERATION
2.2 Operating Principle
The following instructions were compiled to provide you information on how to obtain long
and trouble free use of the machine. Periodic maintenance of the machine is essential.
Read the manual carefully and thoroughly familiarize yourself with the machine and all it
’
s
functions. Failure to do so may injure yourself or a bystander.
2.3 Delivery Checks
Immediately on taking delivery of your new machine and before putting it into service.
l
Read the operation manual completely
—
it could save a great deal of unnecessary
expense.
l
Read the engine manual supplied.
l
Check the general condition of the machine
–
has it been damaged during delivery?
l
Check engine oil level.
l
Check fuel level.
l
Hydraulic fluid level
Recommended lubricants are detailed in the Care and Maintenance section.
2.4 Before Starting
Before starting the machine, check the following items:
l
All handles are free from grease, oil and dirt.
l
All control levers are in the neutral position.
l
All bolted joints are tightened.
l
Fuel level
l
Water tank level
l
Oil level in the engine
l
Air cleaner maintenance indicator
l
Hydraulic fluid level
NOTICE:
Check the hydraulic fluid level and the oil level in the engine and eccentric element.
The warranties are VOID if the machine is run without oil and hydraulic fluid.
2.5 To Start
Before starting the machine must know the location and function of all controls.
1. Do not actuate starter for more than 20 seconds at a time. If engine does not start,
wait 1 minute before repeating attempt. If engine does not start after two attempts,
trace the cause according to Diagnosis Chart.
