14
OPERATION
2.7 Operation
–
Driving
Before driving, check the operation of push-stop, parking brake and controls. Check
that the machine stops when the push-stop is pushed.
1. Forward operation:
Move the forward /reverse ring (1) forwards.
2. Reverse operation:
Move the forward/reverse ring (1) backwards.
3. Vibration on:
Move the vibration lever (2) forward.
4. Vibration off:
Move the vibration lever to position 0.
5. Self-driven forward
The reversing machine will move forward automatically when the operator touch
the self-driven forward lever (3). In order to ensure the operator
’
s security.
2.8 Warning lamps
There are two lamps: one for charging and one for oil pressure. The two lamps must
turn off during operation. If the don
’
t turn off, stop the engine and check the fault.
2.9 Operating near edger
At least 2/3 of the plate should be on a surface with full bearing strength when operating
along edger.
3
1
2
