9
Operation information
After complete "before starting" check items listed in the chapter, you can start
the engine.
Rollers mounted centrifugal clutch, which drives the hydraulic pump so that no need idling
of the engine
With the increase in the engine speed, the clutch will be combined, and the engine drives
the hydraulic pump, and output hydraulic pressure driving the drum and vibrating
mechanism. Slowly push the throttle stick from minimum to maximum position,
the engine
speed is maximum speed at this moment, it’s work speed.
Avoid to operate the machine on a fully dense, hard, not bound surface. Otherwise, the
bearings and other components will be damaged, and this will greatly shorten the life of
the machine.
When working on slopes, be extra careful to operate the machine in order to avoid
dumping of the machine. Always moving up and down slopes, not to move around.
When the machine back, making sure not to stand after the operating handle. Always
stand beside the operating handle, facing the direction of movement of the machine
。
*Lift
Be sure to stop the engine, and then lift. With sufficient lifting force of the rope. Use a little
lift hook, vertical lift without vibration. Do not allow any person or animal to stand under
lifted the machine. For security, do the necessary lifting height only.
*Transportation
Motor Transport
Confirm lock handle, and will use enough width, length and intensity of the ramp under the
car when run the machine into operation or unloading the machine from motor.
Use the parking brake in transit to fasten the machine securely in the car.
In the course of loading and unloading the machine, the operating handle may
suddenly move. Do not go near the operating handle to avoid injury.
Caution
