background image

 

Safety Alert 

For the safety for you and other people, please learn and understand the safety 

information completely.If you are not sure how to operate machine properly or have any 
questions, please consult with your supervisor or contact with dealer nearby or Masalta. 

 
 
 
 
 

 

Machine should be operated within limited area. 

 

  Machine must be operated by trained person. 

 

 

The owner & operator must comply with local labor protection regulations 

 

  Lift machine with appropriate lifting device. 

 

 

Operate machine on balanced ground,and be careful to avoid overturned when 
worked in the edge of Ditch. 

 

 

When worked on slope, operator should pay attention to control the moving 
direction, keep up and down, and never do side-to-side movement. 

 

 

To keep safe distance for normal person and Unauthorized person (Animal 
included), draw a warning line around working area. 

 

 

Operator should wear protection device when operate machine. 

 

  Operator should know how to stop machine safely when meet trouble before start 

machine. 

 

  Stop engine before maintenance 

Engine will become heater during working, Don’t touch engine until cool down. 

 

 

Don’t leave engine when it’s working. 

 

 

Don’t remove or break our protective device which protect your safety. Checking 
safety device often, don’t operate machine before damaged safety device 
replaced or maintenance. 

 

 

Don’t operate machine when you are sick or tired, or functioned by alcohol or 
drug. 

 

  Danger should be occurred with un-proper    maintenance and operation. Read and 

understand this section enough before any maintenance. 

Attention 

Summary of Contents for MDRS65 Series
























Reviews:

Related manuals for MDRS65 Series