MASCHIO GASPARDO BISONTE 220 Use And Maintenance Download

Page: 38 / 96

cod. F07011705

USE AND MAINTENANCE

ENGLISH

38 - EN

nitions

Below is a list of de

nitions of the main terminology used in this Manual. Read these de

nitions carefully before consulting

the Manual.

•

OPERATOR

: .........................................The person/s charged with installing, starting up, adjusting, carrying out main-

tenance, cleaning, repairing or transporting a machine.

•

DANGER ZONE

: ...................................any area inside a/o near a machine in which the presence of an exposed person

constitutes a risk for the safety and health of that person.

•

DANGER CONDITION

: .........................Any condition in which an operator is exposed to one or several risks.

•

RISK

: .....................................................A combination of likelihood and seriousness of possible injuries or damage to

the operator’s health in a danger condition.

•

PROTECTIONS

...................................Safety measures consisting in installation of speci

c technical systems (guards

and safety devices) to protect operators against dangers.

•

GUARD

: ................................................An element on the machine which is used in a speci

c way to protect the ope-

rator by means of a physical barrier. Depending on its construction, it can be a
shroud, a cover, a shield, a door, a fence, a guard, a segregation unit, etc.

•

EXPOSED PERSON

: ............................Any person who happens to be completely or partially in a danger zone.

•

USER

: ...................................................The user is the person or the organization or the

rm which has purchased or

rented the machine and intends to use it for the purposes it was conceived for.

•

QUALIFIED PERSONNEL

: ...................Those persons who have been specially trained and quali

ed to carry out

interventions of maintenance or repair requiring a particular knowledge of the
machine, its functioning, safety measures, methods of intervention - and who
are in a position to recognize the potential dangers when using the machine and
are able to avoid them.

•

TRAINED PERSONNEL

: ......................These are operators that have been informed or trained on the operating tasks

and relating risks.

•

AUTHORIZED SERVICE CENTER

: .....The authorized Service Center is a structure legally authorized by the manufac-

turer which disposes of personnel specialized and quali

ed to carry out all the

operations of assistance, maintenance and repair - even of a certain complexity
- found necessary to keep the machine in perfect working order.

Responsibility

The

Manufacturer declines any direct or indirect responsibility

in the following cases:

-  incorrect machine operation for non-intended uses;
-  machine operation by unauthorised operators who have not been trained and do not have a driving license;
-  non-performance of scheduled maintenance;
-  unauthorised changes or work;
-  installation of non-genuine and speci

c spare parts;

-  non-observance, either total or partial, of the instructions provided in this manual;
-  non-observance, either total or partial, of the instructions provided in this manual;
-  failure to apply regulations on safety, hygiene and health at work;
-  unscheduled and unpredictable events.

ATTENTION

• Minors, illiterates and persons under altered physical or psychological conditions must not be allowed to operate the

machine.

• Operators who do not have a suitable driving license, or who are not properly informed and trained, must not be allowed

to operate the machine.

• The operator must check that the machine operates correctly, and must replace and repair parts subject to wear that

may cause damage.

• The customer should instruct personnel on accident risks, on the operator safety devices provided, on noise emission

risks and on general accident prevention regulations provided for by the international directives and by the law in the
country in which the machines are used.

• In any case, the machine should be used exclusively by skilled operators who will be held to follow scrupulously the

technical and accident-prevention instructions in this manual.

• The Customer is responsible for

nding and selecting the category of suitable PPE (Personal Protection Equipment).

• The machine features pictograms which the operator must keep in perfect readable conditions. When no more readable,

they must be replaced as instructed by European regulations.

• It is the user’s responsibility to check that the machine is operated only in optimum conditions of safety for people, animals

and property.

• Any change made on the machine without authorisation relieves the Manufacturer from any and all responsibility for

damage to objects or injuries to operators or third partiesi.