cod. F07011705
fi
g.1
(1)
(2)
(3)
(5)
(7)
(4)
(6)
(8)
USE AND MAINTENANCE
ENGLISH
40 - EN
1.2 GUARANTEE
The guarantee is valid for a year, against all defects of material, from the date of delivery of the equipment.
On delivery, check that the equipment has not been damaged during transport and that the accessories are integral and
complete.
POSSIBLE CLAIMS MUST BE PRESENTED IN WRITING WITHIN EIGHT DAYS OF RECEIPT.
The purchaser will enforce his rights on the guarantee only when he has respected the conditions concerning the bene
fi
t
of the guarantee, set out in the supply contract.
1.2.1 EXPIRY OF GUARANTEE
Besides what has already been set out in the supply contract, the guarantee expires:
- If the limits set out in the technical data table are overshot.
- If the instructions set out in this booklet have not been carefully followed.
- If the equipment is used badly, defective maintenance or other errors by the client.
- If modi
fi
cations have been carried out without written authorization of the manufacturer and if non original spare parts
have been used
.
1.3 IDENTIFICATION
Each individual machine has an identi
fi
cation plate
(
fi
g.1),
indicating the following details:
1)
Mark and address of the Manufacturer;
2)
Designation of the machine;
3)
Type and model of the machine;
4)
Unloaded mass, in Kilograms;
5)
Mass full load, in Kilograms;
6)
Serial number of the machine;
7)
Year of manufacture;
8)
Place of manufacture;
You are advised to note down your data on the form below,
along with the date of purchase (9) and the dealer’s name
(10).
9) ____________________
10) ____________________
This information must always be quoted whenever assistan-
ce or spare parts are needed.
ATTENTION
Do not remove, tamper with or make the CE mark
af
fi
xed on the machine illegible.
Refer to the information provided on the CE mark for
the manufacturer’s contact details (e.g. for requesting
spare parts, etc.).
When the machine is demolished, destroy the CE
marking.
2.0 GENERAL SAFETY RULES
2.1 DANGER AND INDICATOR SIGNALS
The signs described are reproduced on the machine
(
fi
g.2)
.
Keep them clean and replace them if they should come off
or become illegible. Carefully read each description and
learn their meanings by heart.
2.1.1 WARNING SIGNALS
1) Before operating, carefully read the instruction booklet.
2) Before carrying out maintenance, stop the machine and
consult the instruction booklet.
2.1.2 DANGER SIGNALS
4) Danger of falling. Do not get up on the machine
while it is moving.
5) Danger of getting hooked by the Cardan shaft. Keep
away from moving parts.
6) Danger of being crushed. Do not get between the tractor
and the machine.
7) Danger of possible shearing of lower limbs. Keep a safe
distance from the machine.
8) Before engaging the pto, check that the rpm rate is that
prescribed
Summary of Contents for BISONTE 220
