MASCHIO GASPARDO BISONTE 220 Use And Maintenance Download

Page: 45 / 96

cod. F07011705

USE AND MAINTENANCE

ENGLISH

EN - 45

3.0 DESCRIPTION OF THE MACHINE

Machine mod. «BISONTE» has been exclusively designed and manufactured to cut grass, pruned branches in general,

up to 6 cm

in diameter.

This agricultural equipment, can only operate by means of a Cardan shaft applied to the power take-off of an agricultural
tractor equipped with a lifting unit, with a three-point universal joint.

ATTENTION

LOSS OF THE EQUIPMENT ON THE ROAD AND LOSS OF CONTROL OVER THE VEHICLE, DEATH OR SERIOUS
INJURIES FOR THE DRIVER AND NEARBY PEOPLE
The machine is suitable only for the uses indicated. The recommended working speed is 6÷8 km/h.
Any other use different from that described in these instructions could cause damage to the machine and repre-
sent a serious hazard for the user.

This machine has been intended for professional use: it must be operated exclusively by preliminarily educated,
trained and authorised operators who hold a regular driving license.

Operating instructions

• The machine is intended for professional users: operation must be allowed to skilled operators only.
• The machine must be operated by one operator only.
• The machine is not intended for purposes other than farming applications.

Conforming machine operation also includes:
• compliance with all the instructions provided in this manual;
• performance of inspection and maintenance operations described in this manual;
• exclusive use of genuine MASCHIO GASPARDO spare parts.

The Customer must ensure that Quali

ed Operators for routine machine operation are suitably trained and prove competent

in carrying out the tasks assigned to them, taking care of their safety and that of third parties.
Depending on the quali

cation level and tasks assigned, quali

ed operators must be duly instructed on the machine fun-

ctions so as to operate and manage it correctly and guarantee good machine ef

ciency.

Regular operation depends on the correct use and adequate maintenance of the equipment. It is advisable therefore to
observe scrupulously what is described in order to prevent any inconveniences that could prejudicate proper operation
and duration. It is just as important to keep to what is described in this booklet since

the Manufacturer declines all

responsibility due to negligence and non-observance of these rules

. At any rate the Manufacturer is available to

assure immediate and accurate technical assistance and all that may be necessary for the improved operation and better
performance of the equipment.
The machine user shall be liable for damage caused by non-compliance with the instructions hereby.

ATTENTION

CRUSHING OR SHEARING HAZARD. POTENTIAL SERIOUS INJURIES OR DEATH
The machine must be operated by quali

ed operators of the Customer. The operator must wear suitable personal

protection equipment (safety footwear, overalls and gloves, etc.).

Precautions for use

Below is a list of precautions for use the machine:
• ensure that there are no remarkably big stones or rocks on the soil;
• ensure that there are no metal elements of any type whatsoever, but especially nets, cables, wire ropes, chains, pipes,
etc. on the soil.