Maschio G19501383 Use And Maintenance Download

Page: 76 / 196

USE AND MAINTENANCE

ENGLISH

cod. G19501383

6.0 MAINTENANCE

+HUHIROORZVDOLVWRIYDULRXVPDLQWHQDQFHRSHUDWLRQVWREHFDUUL
HGRXWSHULRGLFDOO\/RZHUHGRSHUDWLQJFRVWVDQGDORQJHUODVWLQJ
VHHGLQJPDFKLQHGHSHQGDPRQJRWKHUVRQWKHPHWKRGLFDODQG
FRQVWDQWREVHUYDWLRQRIPHVHUXOHV

The maintenance periods listed in this booklet are only indi-
cative and are for on normal conditions on use, therefore be
varied depending the kind of service, the more or less dusty
surroundings, seasonal factors, etc. For more serious condi-
tions of service, maintenance will logically be done more often.

All operations must be carried out by expert personnel,
equipped with protective gloves, in a clean and dust-free
environment.

All maintenance operations must be carried out with the ma-
chine hooked up to the tractor, the parking brake engaged,

WKHHQJLQHRႇWKHLJQLWLRQNH\UHPRYHGDQGWKHHTXLSPHQW

sitting on suitable supports on the ground.

ATTENTION

USING OILS AND GREASES
- Before injecting grease, the nipples must be cleaned to avoid

mud, dustand foreign bodies from mixing with the grease,

RWKHUZLVHWKH\ZLOOUHGXFHRUHYHQDQQXOWKHHႇHFWRIWKH

lubrication.

- Always keep oils and grease out of reach of children.
- Always read warnings and precautions indicated on the

containers carefully.

-  Avoid skin-contact.
-  After use wash the equipment thoroughly.
-  Treat the used oils and polluting liquids in conformity with

the laws in force.

RECOMMENDED LUBRICANTS

)RUOXEULFDWLRQLQJHQHUDOZHDGYLVH

OIL SAE 80W-90

)RUDOOJUHDVLQJSRLQWVZHDGYLVH

AGIP GR MU EP 2 GREASE

RUHTXLYDOHQWVSHFL¿FDWLRQV',1.3.

CLEANING
- The products used for cleaning must be disposed of accor-

ding to the laws in force.

&OHDQ DQG PDLQWDLQ WKH PDFKLQH DIWHU SXWWLQJ DQ\ UHPRYHG

JXDUGVEDFNLQSRVLWLRQ5HSODFHWKHPZLWKQHZRQHVLIWKH\DUH
GDPDJHG

- Clean the electrical components only with a dry cloth.

USING PRESSURISED CLEANING SYSTEMS (Air/Water)
- Always keep in mind the rules that regulate use of these

systems.

-  Do not pressure clean electrical components.
-  Do not pressure clean chromium-plated components.
-  Do  not  place  the  nozzle  in  contact  with  the  parts  of  the

equipment, especially the bearings. Keep it at a min. distance
of 30 cm from the surface to be cleaned.

7KRURXJKO\OXEULFDWHWKHHTXLSPHQWHVSHFLDOO\DIWHUFOHDQLQJLW

ZLWKSUHVVXULVHGV\VWHPV

HYDRAULIC SYSTEMS
- Hydraulic systems must be maintained exclusively by skilled

operators.

- The hydraulic system is under high pressure; because of

the accident risk, when searching for leakage points special
auxiliary instruments should be used.

- In case of participation on the hydraulic system, to unload

the hydraulic pressure carrying all the hydraulic commandos
in all the positions some times after to have extinguished
the motor.

- Oil escaping at high pressure can cause skin injury with the

risk of serious wounds and infection. Call a doctor immedia-
tely if such an incident occurs. If the oil with surgical means
is not removed quickly, can take place serious allergies and/
or infections. Therefore, the installation of hydraulic com-
ponents in the tractor driver’s cab is strictly forbidden.

All

WKHFRPSRQHQWVRIWKHV\VWHPVKRXOGEHSRVLWLRQHGFDUHIXOO\WR
DYRLGSDUWVEHLQJGDPDJHGXULQJXVHRIWKHHTXLSPHQW

$WOHDVWRQFHD\HDUKDYHWKHK\GUDXOLFSLSHVFKHFNHGIRUZHDU

E\DQH[SHUW

5HSODFHWKHK\GUDXOLFSLSHVLIWKH\DUHGDPDJHGRUZRUQE\DJLQJ
5HSODFHWKHK\GUDXOLFSLSHVHYHU\\HDUVHYHQLIWKH\KDYHQRW

EHHQXVHGQDWXUDODJLQJ

)LJXUH5VKRZVK\GUDXOLFSLSHVEHDULQJWKH\HDURIPDQX

IDFWXUHDVDQH[DPSOH

$IWHUWKH¿UVWKRXUVRIRSHUDWLRQDQGWKHQDIWHUHYHU\

hours, check that:

DOOWKHHOHPHQWVRIWKHK\GUDXOLFV\VWHPDUHZDWHUWLJKW
DOOWKHMRLQWVDUHWLJKW

Before starting the machine up, check that: