4
135
Instruments and Controls
•
Display Brightness with Headlights
Off
When "Display Mode" is in "Manual"
mode, you can select the brightness
with the headlights off (day
condition). Adjust the brightness as
previously explained for "Headlights
On" setting.
•
Units
After touching the “Units” soft-key,
depending on the market, you
may select between “Metric-A”
and "Imperial" or “Metric-B” and
"Imperial" or “US” and "Metric-A" or
"Custom" units of measure. Selecting
"Custom", you may choose your
personal configuration. Each unit
of measure can be independently
displayed in the TFT Display and in
the navigation system. The following
selectable units of measure are listed
below:
-
Speed
unit:
select from: “MPH” or “km/h”.
-
Distance
unit:
select from: “mi” or “km”.
-
Fuel Consumption
unit:
select from: “MPG (US)”, “MPG
(UK)”, “L/100km” and “km/L”.
-
Pressure
unit:
select from: “psi”, “kPa” or “bar”.
-
Temperature
unit:
select from: “
°
F” or “
°
C”.
-
Torque
unit:
select from: “lb-ft” or “Nm”.
•
Touchscreen Beep
When in this display, you can turn
on or shut off the sound activated by
pressure of a touchscreen soft-key.
•
Show Main Category Bar Labels
By selecting this function, the system
shows the labels on the soft-keys of
the main category bar.
•
Navigation Turn-by-Turn Displayed in
Cluster
By selecting this function, the
next turn direction will appear
on the instrument cluster along a
programmed route until the desired
destination is reached (see picture).
•
Phone Pop-ups Displayed in Cluster
When this mode is selected a pop
up message will appear in case of
incoming call. Information associated
to call in progress are available by
entering to the “Audio” menu using
the buttons on the steering wheel RH
side.
•
Cluster Options
Selecting this mode allows you to
select which content to display in
each of the customisable areas in
the upper left and upper right
on the display of the instrument
cluster: "Time", "Date", "External
Temperature", "Compass" or
"Empty".
It is also possible to select the Audio
info on Cluster between "Low",
"Medium" and "High" level.
Safety & Driving Assistant
Touch this soft-key to set the following
modes.
•
Park Sense
The park assist system will scan for
objects behind and in front of the
vehicle when the transmission is in R
(Reverse) mode and the vehicle speed
is less than 7.5 MPH (12 km/h). The
system can be enabled with “Sound
Only", "Sound+Display", or turned
“Off”. See "Park Assist" in section
"Starting and Driving" for further
information.
Summary of Contents for MC20 2022
