3
74
Before Driving
the Engine" in section "Starting and
driving".
NOTE:
• do not start the engine immediately
after reconnecting the terminals, but
press the ignition device, without
operating the pedals, to turn on the
instrument cluster and then start the
engine.
• the
on the instrument cluster
will remain on, indicating that the
steering must be initialized. To do
this, turn the steering wheel from
one end to the other and bring it
back to the center position within
30 seconds from starting the engine.
If any red warning lights on the
instrument cluster remain lit, stop the
engine, wait for at least 5 seconds
and repeat the starting procedure
described above.
Shift Ignition Device to STOP Alert
Opening the driver's door to exit the
vehicle when the ignition device is set
in
ON
(engine not running), a beep
will remind you to cycle the ignition to
STOP
.
In addition to the acoustic signal a
dedicated message is displayed on the
instrument cluster.
If the ignition device is left in
ON
position, when vehicle is locked the
system will turn off the instrument
cluster and automatically set ignition
device to
STOP
after 30 minutes.
Setting the MIA system (see "Functions
of Settings Menu on MIA" in section
"Instruments and Controls"), radio
will remain active for up to 10 minutes
after the ignition device is cycled to
the
STOP
position. Power window
switches and power outlet are not
affected by this function.
Passive Entry System
The "Passive Entry" system is an
enhancement to the vehicle’s Remote
Keyless Entry (RKE) system. This
function allows you to lock and unlock
the vehicle’s door(s) without having
to press the key fob lock or unlock
buttons.
The key fob is detected only after
acting on the buttons of the door
handles. If the detected key fob is
valid, the doors are unlocked pressing
the handle button (the elements
that unlock depend on the setting of
the “Passive Entry” programmable
function).
NOTE:
The "Passive Entry" system does not
lock and unlock the doors directly and
immediately but with a slight delay
(about 2 seconds).
Unlock the Door/Doors
With a valid key fob within 3.3 ft (1
m) of the driver's door handle, lift
the driver’s door external handle to
unlock the door automatically. Lifting
the handle, do not press the door lock
button on the handle.
Summary of Contents for MC20 2022
