11 | 50
Installation Manual LOGS50 EN_MI_090221
port and click on open channel selection. Once the port is correctly enabled,
the red light turns green.
Always select the outgoing COM port “serial
port option”.
Once the BT channel is ON, it will remain active during 5 minutes since the
last communication (data transfer). Every time there is information
interchange the 5-minute time will keep on course. If there is not any petition
during this period, then, the channel will automatically close being necessary
to initiate the process again of approaching the magnet and opening the BT
channel.
Figure 16: COM selection in application ICONF .
Figure 17: open channel in application ICONF.
