8 | 50
Installation Manual LOGS50 EN_MI_090221
In order to achieve good reception conditions, avoid placing the unit inside
metallic enclosures and near to interference sources. Consider the usage of
cable extensions an external antenna when the reception or communications
proves to be weak or poor.
9. CONFIGURE LOGS50 UNIT WITH YOUR COMPUTER USING
THE APPLICATION “CONFIGURATOR PROGRAM CONF50”
Once LOGS50 is powered, approach a magnet to the REED switch
indicated on the enclosure with the symbol shown. A buzzer will sound in
the presence of the magnet. Keep the magnet close for 2-3 seconds. This
action will awake the BT module.
Figure 11: location to near the magnet.
Here are the steps to set a peripheral up on Windows 10. In this link, the
user will also find a way to manage the Bluetooth device
https://www.windowscentral.com/how-manage-bluetooth-devices-windows-
10
.
The device will appear as “ILOGS-XXXX” (If password or PIN asked, enter
“1234”).
Figure 12: Add BT device.
