18
19
A
B
D
C
G
F
I
J
Caution
When you are finished turning, the turn signals do not turn off automatically.
You have to press this button to stop them.
Dimmer switch
A
Press the button, using the switch allows
you to choose the distance of the headlights :
high or low.
High beam
Low beam
Turn signal switch
B
Use the turn signals to turn left or right.
Operate the button to the left or to the
right, the indicator will flash. Press the switch
again to stop the turn signal.
(R) Turn right
(L) Turn left
Horn Button
C
Turn the key switch to the ON position, press
the horn button and it will emit a sound.
Brake lever
D
To apply the rear brake, gradually press the
brake lever located on the left handlebar. As
the scooter is equipped with hydraulic braking,
the brake lever must not be manipulated abruptly or brutally. Pressing the lever
automatically switches on the brake light.
Caution
• Use the emergency stop switch only in an emergency situation.
• Using only one brake can cause the scooter to skid.
• When cornering, excessive braking can cause a loss of grip and lead to a fall.
• Always be sure to brake gradually while respecting the safety distances.
Electric starter button
F
Press this button to start the engine.
Engine shutdown switch
G
It is used to manually stop the motorcycle in an
emergency situation.
Position it on
to be able to start the engine.
Brake lever
I
To apply the front brake, gradually press the brake lever located on the right
handlebar. As the sooter is equipped with hydraulic braking, the brake lever must
not be manipulated abruptly or brutally. Pressing the lever automatically switches
on the braking warning light.
Accelerator grip
J
It makes it possible to vary the speed of rotation of the motor. The acceleration is
done by making it turn towards you; deceleration, by releasing the handle.
V - Control system
Left handlebar control system
Right handlebar control system
