Figure 11. Step
Step Four (Figure 11):
1.
While holding the deflector in correct
position ref detail D of Fig 9, refit the
new Air slide (983278) to the front of
the heater.
2.
Refit 2 spacers and 2 x (M6X50) bolts
back to the top front of the heater.
3.
Tighten the 2 x M6 nuts to the back of
the air deflector to secure all the parts
together.
Figure 12. Step five
Step Five (Figure 12):
1.
Refit the louver to the top of the
heater using the 2 x (M6X10) screws.
