6
Step 7
Place the drip tray into position (16), attach the fat cup (17).
Step 8
Place the flame tamers (20), the cooking grill (18), the hot plate (19)
and the warming rack (21) into the BBQ body in turn.
Step 9
Fasten bracket (22) to left hand of Grill Body using 2 x M6-12 (d) &
2 x M6 Nuts (e).
2 x (M6x12) in the fastener kit.
Step 10
Attach Hose (23) and the Regulator Assembly (24) to the gas
fasteners.
Rotisserie option 559218
Tools needed for assembly
Crosshead screwdriver, 10mm A/F spanner, 2x 8mm A/F Spanners.
Assemble the Prong (24), the Rod-A (25), the Rod-B (26) and the
Guide (27), the Rotisserie handle (28) together as in the diagram.
Note!
Rotisserie Rod 26 is threaded LH, assemble by turning
rod anti-clockwise. Tighten with
8mm A/F Spanners. This
connection must remain spanner tight.
25
24
26
27
28
Place inside of grill
Assemble the Motor holder to the appliance with 2pcs Screw
M6*10, 2 fibre washer and 2pcs Nut M6 as the
diagram. Place the battery into the Motor. Assemble the Motor and
Rotisserie to the appliance as the picture.
Nut M6
Motor
holder
Fibre washer
Screw M6*12
Note!
Take note of the b - positions prior to fitting the
batteries.
Note!
There is an option to use a mains adaptor (not
stocked). Requires:
Mains adaptor 240 volt > 3 volt DC 3 milliamps or greater.
