Method of Usage
7) Air pressure massage
Button
Description
ARM
Arms air pressure massage function with switch and intensity settings, 3
intensity level adjustments (in one button)
BUTTOCKS
Buttocks air pressure massage function switch
FOOT
Footrest air pressure massage function switch
INTENSITY
Buttocks and legs air pressure intensity, 3 intensity level adjustments
CALF STRETCH
When the calf rest air pressure is working, pressing this button can switch
this function on / off
Note: If the buttocks and legs air pressure are at work, the lower body air pressure massage mode is
on.
8) Calf rest and back rest angle adjustment
Name
Button
Description
FOOT REST
Calf rest goes up button: Press this button, calf rest goes up; stops when
the button is released.
Calf rest goes down button: Press this button, calf rest goes down; stops
when the button is released.
BACK REST
Back rest goes up button: Press this button, backrest goes up slowly;
stops when the button is released.
Back rest goes down button: Press this button, backrest goes down
slowly, stops when the button is released.
POSITION
ADJUST
Linkage up button: Press this button, backrest goes up slowly, and calf
rest goes down; stops when the button is released.
Linkage down button: Press this button, backrest goes down slowly, and
calf rest goes up; stops when the button is released.
LIE DOWN
MODEL
Lie down mode: Has 4 settings; the setting will change with each button
press (Screen displays 01 - 04).
Method of Usage
3.
Turn off power, stop massage
•
During the massage process, pressing the red button will stop all massage functions and the
back rest and calf rest will restore automatically. If massage process is up to the set time, all
massage functions will stop, but the back rest and calf rest will not be restored
automatically.
•
At the end of the set time or when users turn off the massage chair, the manual controller
display will indicate “memory set on”. This reminds the users to either store the current
massage mode or choose memory A or B as needed to store it. Pressing the red button will
turn off the whole machine and restore the massage hands. Alternatively, waiting for 10
seconds will cause the machine to turn off automatically and restore the massage hands.
•
Turn off the power
4.
Seat cushion installation instructions
•
Find the air tube fitting located on the left bottom of the seat frame and connect it well
according to the colour. Note: The three intake tubes in the seat must get through from the
20*10 steel tube in the middle of the seat frame.
•
Make sure to align the two metal buttons under the seat with the 20*10 steel tube in the
mid of the seat frame. Push the seat cushion backward to make sure the metal buttons and
the 20*10 steel tubes are buckled well. Do this until the round hole at the right rear end of
the seat aligns with the threaded hole on the steel tube on the right side of the seat frame.
Note: before you push the seat cushion backward, you should straighten the intake tube in
the seat to avoid it getting stuck by the 20*10 steel tube. (Figure 2)
10
11
