Method of Usage
•
Find the upper mounting hole on the end of the fixed iron plate, and fasten the inner
hexagon screw tightly to finish the whole armrest installation. Use the same method for the
two armrest installations. (Figure 9)
•
All finished. (Figure 10)
6.
Manual controller support installation
•
Prepare the manual controller support assembly. (Figure 1)
•
Insert the manual controller support assembly into the cylindrical fixed tube. Note that the
two groups of mounting holes should correspond with one another. (Figure 2)
Method of Usage
•
Prepare the two screws which will be fixed on either side. (Figure 3)
•
Fasten the two screws to the two sides to finish the installation. (Figure 4)
7.
Controller installation and usage
Insert the manual controller in the support. (Figure 1)
The support should be able to turn left and right freely. (Figure 2)
The manual controller should be able to swing freely in a horizontal direction. (Figure 3)
14
15
