02
01
03
04
05
06
07
08
06
Buckets, silage
handling and
distribution
01
Series HD
The strongest buckets in the whole
range. Based upon the H Series
but feature: 20% thicker steel, a
more powerful cutting edge, plus
wider and longer floor reinforcement.
Available in 4 widths from 185 cm
(0.72 m
3
) up to 260 cm (1.03 m
3
).
02
Series HV
For users whose tasks require
large volumes e.g. carrying grain,
beet and feed. The large capacity
is achieved through innovative
bucket design, being deeper and
taller than average. Available in
4 widths from 200 cm (1.16m
3
)
up to 260 cm (1.85 m
3
).
03
Series L & LV
An excellent choice for lighter duties
and where budgets are limited.
Available in 4 widths from 130 cm
(0.51 m
3
) up to 220 cm (1.25 m
3
).
04
Grading bucket
Designed to provide excellent
driver visibility to the tip of the
bucket through its low back plate.
Special 10 mm thick angle iron
reinforces the 20 mm subframe
plates, making this bucket the
ideal implement for grading tasks.
Width 220 cm (0.65 m
3
).
05
High tipping bucket
Increases loading height by
120 cm which means even a short,
compact front loader can fill a high
trailer. The bucket tips from the
From the Multibenne, a perfect all-round
silage handling implement, to the versatile
Silograb, this range includes some of the
most reliable and innovative silage handling
equipment on the market today.
front edge, removing the necessity
to wait for the front edge to clear
the trailer side before reversing.
Width 120 cm (2.00 m
3
).
06
Powergrab
Designed for silage clamp
operations, Powergrab’s wide jaw
opening allows it to work against
a verticle silage wall, whilst its
conical bucket design ensures
free discharge when emptying.
Available in 4 widths from 185 cm
(1.0 m
3
) up to 260 cm (1.4 m
3
).
07
Maxi grapple
A large jaw opening enables it to
handle a wide range of materials,
including large bales, plus many
other types of load. Grappling arm
can easily be removed if required.
Available in 3 widths, from 210 cm
up to 260 cm.
08
Silograb
The tines of this implement are
mounted within a hardened box
section, their close distribution
eliminating silage spillage. Upper
jaw tines follow a circular movement
producing a clean cut. Available in
7 widths from 130 cm (0.69 m
3
) up
to 250 cm (1.33 m
3
).
