1 - 14
INTRODUCTION
Tractor identification and technical specifications
2-9 Technical specifications of 4WD front axle with bevel gear pairs
Type of axle
In spheroidal cast iron swivelling around a
central pivot
Type of reductions
Central pinion and ring gear 14/32
20/26 and 18/41 double bevel drive
and 3.333 epicyclic final drive
Clutch control
Mechanical with hand lever or electrohydraulic
Ratio between front and rear axle
1.430 with 4WD
2.543 with Fast Run
Type of hydraulic clutch
Hydraulic clutch for 4WD with oil-cooled disks,
electrohydraulic control and 1:1 input/output ratio
Hydraulic clutch with oil-cooled discs for Fast Run
with automatic engagement when the steering an-
gle exceeds 35°.
1:1.78 input/output ratio
Max. steering angle
52°
Max. axle swing
8°
Turning radius
3054 mm.
