MASSEY FERGUSON MF 3700 Series, Operator'S Manual

These tractors are designed only for usual farming activities (intended use). Use for any other activity

(particularly forestry work) is considered to be contrary to the intended use.
Strict compliance with the repairs, service and operating conditions as specified by Massey Ferguson is

also an essential component of the intended use.

IMPORTANT: 

Massey Ferguson accepts no responsibility in the event of damage to equipment or personal injury

resulting from improper use.

The tractor must only be used, serviced and repaired by personnel who have full knowledge of its specific

features and who are aware of the applicable safety measures (prevention of accidents).
Customers are strongly advised to contact a Massey Ferguson dealer in the event of after-sales problems

and for any adjustments which may be necessary.

2.1.2  Foreword

Massey Ferguson tractors are designed and manufactured to offer trouble-free performance for many

years. We developed them to offer the best working conditions possible for both comfort and safety.

Agricultural work always involves various hazards. Therefore it is better to be aware of them and act

accordingly. Please note the following points requiring your utmost attention (not limited to these). Please

contact your dealer for any further information about the tractor.

WARNING:
This tractor is designed solely for use in customary agricultural or similar use (“intended
use”). Use in any other way is considered as contrary to the intended use (“unintended
use”). The manufacturer accepts no liability for damage or injury resulting from this
misuse, and these risks must be borne solely by the user. The tractor is designed to drive,
carry and activate various attachments towed or mounted, however within specific
physical restraints. Use the tractor solely for the specific operations it was designed for:
push, pull, tow, drive and carry various interchangeable attachments conceived for
agricultural works. Use of tractors in forestry is limited to specific applications such as
transport, stationary works (such as log splitting), propulsion or equipment with PTO,
electrical or hydraulic system. Normal operations for these applications do not entail any
risk of falling or cutting objects. Any forestry application different from the above, such as
moving forward and loading, requires adjustment of the specific components according to
application (FOPS, Falling Object Protection Structure and/or OPS, Operative Protective
Structures).

CAUTION:
3707, 3708, 3709, 3710 tractors are NOT equipped with OPS protection structure.

Working speed and performance might be affected by several factors such as climate and soil conditions.

Even though the tractor is designed for use of various equipment combinations, different factors might

considerably limit the tractor and or the mounted or towed attachments performance.
Do not use the tractor for other purpose than the manufacturer's intended one as specified in this manual.
Before starting the engine or an operation, make sure nobody is standing by the tractor, the attachments

and the work area. Never set your hands, feet and clothes close to the moving components.
Failure to strictly abide by these precautions when using the tractor or improper use could lead to serious

injury. Pay attention to the hazards deriving from tractor use. Most common injury cases are due to:
• Tractor tipping over
• Collisions with motor vehicles
• Non-conforming starting procedures
• Entangling in PTO shafts
• Fall from the tractor
• Crushing and injury when mounting attachments

GUID-237A178C-A61B-45AC-9C1B-50D16BC3585D [V1]

2. Safety instructions and safety points – Warranty

22

ACT0042570