68
MAINTENANCE
Cooling system
1.Place the vehicle on a level surface.
2.Check the coolant level in the coolant reservoir when the engine is cold as the coolant level will vary
with engine temperature.
3.If the coolant is at or below the minimum level mark, remove the reservoir cap, add coolant to the
maximum level mark, install the reservoir cap.
Don’t removing the radiator cap when the engine and
radiator are still hot, or you could be burned by hot fluid
and steam blown out under pressure. Wait for the engine
to cool before removing the radiator cap. Always use a
thick rag over the cap. Allow any remaining pressure to
escape before completely removing the cap.
NOTE:
The coolant should be between the minimum
and maximum level marks.
