14
4. Verfügbare PZB/IR-Befehle
Der PZB/IR Signaldecoder kann
gleichzeitig bis zu vier unterschied-
liche Informationen aussenden.
Dies sind grundsätzlich immer
die Positionsadresse und der
„Standard-Signalzustand“, sowie
zwei weitere zusätzlich mögliche
Befehle. Werden keine zusätzlichen
Befehle benötigt, können diese de-
aktiviert werden. Werden bei den
Signalen die erweiterten Schaltbe-
fehle für komplexere Signalbilder
statt nur „rot“ und grün“ verwen
-
det, wird die Sonderfunktion 2
automatisch belegt. In diesem Fall
ist nur noch die erste Zusatzfunk-
tion frei nutzbar. Für jede Funktion
stehen drei CVs zur Verfügung,
Für die Programmierung beachten
Sie bitte Anhang 2! In CV 45 +
46 wird für die Sonderfunktionen
der Zeitwert (z.B. die Aufenthalts-
dauer im Bahnhof) festgelegt.
Sonderfunktion-CV‘s
SF1
SF2
Header (Auswahl)
CV 41
CV 43
Funktion (Befehl)
CV 42
CV 44
Zeitwert
CV 45
CV 46
WICHTIGER HINWEIS:
Beachten sie die Anleitung ihres
4. Available ITC/IR-Commands
The ITC/IR-Signal Decoder can
simultaneously transmit up to
four different ITC/IR-standard
informations. These always include
the location address, the standard-
signal-status as well as two
additionally optional commands.
If no additional commands are
needed, you can activate them.
If the additional commands are
used for more complex signals
than just „red“ or „green“, the
special feature 2 will automatically
be occupied. In this case only
the first additional function will
be free to use. For each function
there are three CVs available. For
programming, please follow the
instructions in attachment 2.
In CV 45 the time value is being
set for both special features (e.g.
the time of the train station stop).
Special Feature CV‘s
SF1
SF2
Header (Selection)
CV 41
CV 43
Function (Commd) CV 42
CV 44
Time Value
CV 45
CV 46
IMPORTANT NOTE:
Please observe the Instruction