Umbaubericht
Lokomotiven
Pict.-3: Assembling and wiring of XL-decoder.
Before the first test you must program the decoder:
CV50 = 5 (light to 5V)
CV53 = 5 oder 197 (F1+F2 5V for blinking light on roof)
CV55 = 2 (F1 blinking with 0,5sec. clock)
CV57 = 16 (F2 coupled on F1)
CV56 = 1 (F2 switchable with key 1)
CV113 = 129 (F3 with key 1 for cleaning function on driving forward)
Check basic function:
Loco will drive forward and backward.
Light front + rear glows depending on direction, when turned on.
With Key 1 you can turn on the cleaning motor (only forward).
Pict.-4 : Changes on the light PCB on the roof.
Stand 15.04.2020
Seite 3 / 4
